restore man page on BSDi

Man page or keyword search:  
man Server   6284 pages
apropos Keyword Search (all sections)
Output format
BSDi logo
[printable version]

RESTORE(8)		  BSD System Manager's Manual		    RESTORE(8)

NAME
     restore - restore files or file systems from backups made with dump

SYNOPSIS
     restore -i [-chmvy] [-b blocksize] [-f file] [-s fileno]
     restore -R [-cvy] [-b blocksize] [-f file] [-s fileno]
     restore -r [-cvy] [-b blocksize] [-f file] [-s fileno]
     restore -t [-chvy] [-b blocksize] [-f file] [-s fileno] [file ...]
     restore -x [-chmvy] [-b blocksize] [-f file] [-s fileno] [file ...]

DESCRIPTION
     The restore command performs the inverse function of dump(8).  A full
     backup of a file system may be restored and subsequent incremental back-
     ups layered on top of it.	Single files and directory subtrees may be re-
     stored from full or partial backups.  Restore works across a network; to
     do this see the -f flag described below.  Other arguments to the command
     are file or directory names specifying the files that are to be restored.
     Unless the -h flag is specified (see below), the appearance of a directo-
     ry name refers to the files and (recursively) subdirectories of that di-
     rectory.

     Exactly one of the following flags is required:

     -i	     This mode allows interactive restoration of files from a dump.
	     After reading in the directory information from the dump, restore
	     provides a shell like interface that allows the user to move
	     around the directory tree selecting files to be extracted.	 The
	     available commands are given below; for those commands that re-
	     quire an argument, the default is the current directory.

	     add [arg]	 The current directory or specified argument is added
			 to the list of files to be extracted.	If a directory
			 is specified, then it and all its descendents are
			 added to the extraction list (unless the -h flag is
			 specified on the command line).  Files that are on
			 the extraction list are prepended with a ``*'' when
			 they are listed by ls.

	     cd arg	 Change the current working directory to the specified
			 argument.

	     delete [arg]
			 The current directory or specified argument is delet-
			 ed from the list of files to be extracted.  If a di-
			 rectory is specified, then it and all its descendents
			 are deleted from the extraction list (unless the -h
			 flag is specified on the command line).  The most ex-
			 pedient way to extract most of the files from a di-
			 rectory is to add the directory to the extraction
			 list and then delete those files that are not needed.

	     extract	 All the files that are on the extraction list are ex-
			 tracted from the dump.	 Restore will ask which volume
			 the user wishes to mount.  The fastest way to extract
			 a few files is to start with the last volume, and
			 work towards the first volume.

	     help	 List a summary of the available commands.

	     ls [arg]	 List the current or specified directory.  Entries
			 that are directories are appended with a ``/''.  En-
			 tries that have been marked for extraction are
			 prepended with a ``*''.  If the verbose flag is set

			 the inode number of each entry is also listed.

	     pwd	 Print the full pathname of the current working direc-
			 tory.

	     quit	 Restore immediately exits, even if the extraction
			 list is not empty.

	     setmodes	 All the directories that have been added to the ex-
			 traction list have their owner, modes, and times set;
			 nothing is extracted from the dump.  This is useful
			 for cleaning up after a restore has been prematurely
			 aborted.

	     verbose	 The sense of the -v flag is toggled.  When set, the
			 verbose flag causes the ls command to list the inode
			 numbers of all entries.  It also causes restore to
			 print out information about each file as it is ex-
			 tracted.

     -R	     Restore requests a particular tape of a multi volume set on which
	     to restart a full restore (see the -r flag below).	 This is use-
	     ful if the restore has been interrupted.

     -r	     Restore (rebuild a file system).  The target file system should
	     be made pristine with newfs(8),  mounted and the user cd'd	 into
	     the pristine file system before starting the restoration of the
	     initial level 0 backup. If the level 0 restores successfully, the
	     -r flag may be used to restore any necessary incremental backups
	     on top of the level 0.  The -r flag precludes an interactive file
	     extraction and can be detrimental to one's health if not used
	     carefully (not to mention the disk). An example:

		   newfs /dev/rrp0g eagle
		   mount /dev/rp0g /mnt
		   cd /mnt

		   restore rf /dev/rst0

	     Note that restore leaves a file restoresymtable in the root di-
	     rectory to pass information between incremental restore passes.
	     This file should be removed when the last incremental has been
	     restored.

	     Restore, in conjunction with newfs(8) and dump(8),	 may be used
	     to modify file system parameters such as size or block size.

     -t	     The names of the specified files are listed if they occur on the
	     backup.  If no file argument is given, then the root directory is
	     listed, which results in the entire content of the backup being
	     listed, unless the -h flag has been specified.  Note that the -t
	     flag replaces the function of the old dumpdir(8) program.

     -x	     The named files are read from the given media.  If a named file
	     matches a directory whose contents are on the backup and the -h
	     flag is not specified, the directory is recursively extracted.
	     The owner, modification time, and mode are restored (if possi-
	     ble).  If no file argument is given, then the root directory is
	     extracted, which results in the entire content of the backup be-
	     ing extracted, unless the -h flag has been specified.

     The following additional options may be specified:

     -b blocksize
	     The number of kilobytes per dump record.  If the -b option is not

	     specified, restore tries to determine the block size dynamically.

     -c	     Normally, restore will try to determine dynamically whether the
	     dump was made from an old (pre-4.4) or new format file system.
	     The -c flag disables this check, and only allows reading a dump
	     in the old format.

     -f file
	     Read the backup from file; file may be a special device file like
	     /dev/nrst0 (a tape drive), /dev/rsd1c (a disk drive), an ordinary
	     file, or `-' (the standard input).	 If the name of the file is of
	     the form ``host:file'', or ``user@host:file'', restore reads from
	     the named file on the remote host using rmt(8).  By default, re-
	     store attempts to execute rmt on the remote host, assuming that
	     rmt is in the path.  If this is not the case, use the RMT vari-
	     able as described below.

     -h	     Extract the actual directory, rather than the files that it ref-
	     erences.  This prevents hierarchical restoration of complete sub-
	     trees from the dump.

     -m	     Extract by inode numbers rather than by file name.	 This is use-
	     ful if only a few files are being extracted, and one wants to
	     avoid regenerating the complete pathname to the file.

     -s fileno
	     Read from the specified fileno on a multi-file tape.  File num-
	     bering starts at 1.

     -v	     Normally restore does its work silently.  The -v (verbose) flag
	     causes it to type the name of each file it treats preceded by its
	     file type.

     -y	     Do not ask the user whether to abort the restore in the event of
	     an error.	Always try to skip over the bad block(s) and continue.

DIAGNOSTICS
     Complaints if it gets a read error.  If -y has been specified, or the us-
     er responds `y', restore will attempt to continue the restore.

     If a backup was made using more than one tape volume, restore will notify
     the user when it is time to mount the next volume.	 If the -x or -i flag
     has been specified, restore will also ask which volume the user wishes to
     mount.  The fastest way to extract a few files is to start with the last
     volume, and work towards the first volume.

     There are numerous consistency checks that can be listed by restore. Most
     checks are self-explanatory or can ``never happen''.  Common errors are
     given below.

     Converting to new file system format.
	     A dump tape created from the old file system has been loaded.  It
	     is automatically converted to the new file system format.

     <filename>: not found on tape
	     The specified file name was listed in the tape directory, but was
	     not found on the tape.  This is caused by tape read errors while
	     looking for the file, and from using a dump tape created on an
	     active file system.

     expected next file <inumber>, got <inumber>
	     A file that was not listed in the directory showed up.  This can
	     occur when using a dump created on an active file system.

     Incremental dump too low
	     When doing incremental restore, a dump that was written before
	     the previous incremental dump, or that has too low an incremental
	     level has been loaded.

     Incremental dump too high
	     When doing incremental restore, a dump that does not begin its
	     coverage where the previous incremental dump left off, or that
	     has too high an incremental level has been loaded.

     Tape read error while restoring <filename>
     Tape read error while skipping over inode <inumber>
     Tape read error while trying to resynchronize
	     A tape (or other media) read error has occurred.  If a file name
	     is specified, then its contents are probably partially wrong.  If
	     an inode is being skipped or the tape is trying to resynchronize,
	     then no extracted files have been corrupted, though files may not
	     be found on the tape.

     resync restore, skipped <num> blocks
	     After a dump read error, restore may have to resynchronize it-
	     self.  This message lists the number of blocks that were skipped
	     over.

ENVIRONMENT
     If the following environment variables exist, they are used by restore.

     RMT     Restore uses RMT as the path to the rmt command on the remote
	     system.

     TAPE    Restore checks the TAPE environment variable if the archive has
	     not been specified with the f flag.

     TMPDIR  If the environment variable TMPDIR is set, the string denoted by
	     TMPDIR will be used as the name of the directory where the tempo-
	     rary files are created.

FILES
     /dev/nrst0		the default tape drive
     /tmp/rstdir*	the default directory listing from the tape.
     /tmp/rstmode*	the default owner, mode, and time stamps for directo-
			ries.
     ./restoresymtable	information passed between incremental restores.

COMPATIBILITY
     The 4.3BSD option syntax is implemented for backward compatibility, but
     is not documented here.

SEE ALSO
     dump(8),  mount(8),  newfs(8),  rmt(8)

BUGS
     Restore can get confused when doing incremental restores from dumps that
     were made on active file systems.

     Restore attempts to temporarily clear immutable and append-only flags
     while restoring hard links to files with them set.	 Since only the super-
     user may clear the user flags when the system is in secure mode, restora-
     tion of links to files with the user flags set must be run as root.
     Since not even super-user may clear the system flags in secure mode,
     restoration of links to files with the system flags set must be run in
     single-user mode.

     A level zero dump must be done after a full restore.  Because restore
     runs in user code, it has no control over inode allocation; thus a full
     dump must be done to get a new set of directories reflecting the new in-
     ode numbering, even though the contents of the files is unchanged.

HISTORY
     The restore command appeared in 4.2BSD.

4th Berkeley Distribution	  May 1, 1995				     5
[top]

List of man pages available for BSDi

Copyright (c) for man pages and the logo by the respective OS vendor.

For those who want to learn more, the polarhome community provides shell access and support.

[legal] [privacy] [GNU] [policy] [cookies] [netiquette] [sponsors] [FAQ]
Tweet
Polarhome, production since 1999.
Member of Polarhome portal.
Based on Fawad Halim's script.
....................................................................
Vote for polarhome
Free Shell Accounts :: the biggest list on the net